How do I fix error code E ID on my LG LRMVS3006D?

1. undefined: Check sensor wiring connector for loose or disconnected connection. 2. undefined: Measure sensor resistance at its connector. Short (0 ohm) or open (OL) indicates failed sensor — replace sensor. 3. undefined: If sensor checks good, check harness continuity to Main PCB. 4. undefined: Replace Main PCB if all checks pass and error persists.

LG LRMVS3006DRefrigerator

Error Code E ID

Freezer Room Icemaker Tray Sensor Error

Moderate

Address soon - your appliance may not work properly

Also displayed as: ID E

How to Fix

1
Check sensor wiring connector for loose or disconnected connection.
2
Measure sensor resistance at its connector. Short (0 ohm) or open (OL) indicates failed sensor — replace sensor.
3
If sensor checks good, check harness continuity to Main PCB.
4
Replace Main PCB if all checks pass and error persists.